Basler-electric BE1-700 Modbus Protocol Bedienungsanleitung PDF herunterladen (Seite 15)

9376700991 Rev D BE1-700 Modbus™ Protocol 1-5

Figure 1-3. DOS Configuration Utility Screen - Password

Type 3 (Enable DHCP Client) and press the Enter key. Figure 1-4 will appear. Note: This process (i.e.,

Enable DHCP Client)

must

be followed to assign a static IP address.

Figure 1-4. DOS Configuration Utility Screen – Enable DHCP Client

You will be prompted to enable the DHCP client with a YES (1) or disable it with a NO (2). Type 2 to

disable the DHCP Client and press the Enter key. After a few seconds, the following screen (Figure 1-5)

is displayed.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 91 92

Keine Kommentare

Basler-electric BE1-700 Modbus Protocol Bedienungsanleitung Seite 15